2023 ELLIOTT L65R
Coastline Equipment Crane Division
Neil Goodale: 916-440-8090
Last Updated: 04 September 2023
Neil Goodale: 916-440-8090
Last Updated: 04 September 2023
Price: Inquire
Location: Sacramento, California, United States
Year: 2023
Condition: New
Serial #: 8376
Unit #: 104905
Condition: New
Serial #: 8376
Unit #: 104905
ELLIOTT L65R
Standard features:
One new Elliott HiReach L65R having a 65' working height. Side Reach – 56’6” (Center of rotation to end of platform), Platform Capacity – 600lbs., Rear mount turret with boom stowed over the truck cab, Certified ANSI A92.2 for vehicle-mounted elevating and rotating aerial devices, Boom – 3 section 4-plate design, Lift cylinder – 6” double acting, Boom extension – Hydraulic (no cables), Continuous rotation, Oil reservoir – steel 30-gallon capacity includes sight and temperature gauge. Located back of turret box, Subframe-High strength full length, Lower controls – Electric over hydraulic on turret, Rear Outriggers – 17’0” out and down outriggers, Secondary outriggers – 12’0” out and down outriggers, Outrigger controls – rear of bed each corner. Electric over hydraulic, Cable Carrier – full length with tube for hoses and cables. Includes cover, Platform - hydraulic self-leveling with 160° of rotation. Aluminum floor, Hydraulic pump – fixed gear, USB outlet at upper controls, PTO hour meter, Chassis control – Start/Stop, Throttle and horn located at rear bumper, lower turret controls and upper platform, Automatic rotation lockout – Prevents boom from rotating to side where outriggers are not fully extended horizontally, Emergency pump – 12 volt with switch at lower turret and upper platform, Backup alarm, LED lights – bed marker, stop/tail/turn and reverse, Safety kit – Fire extinguisher, safety triangle kit, and two body harnesses with lanyards, Manuals – (1) operation, maintenance and safety, (1) Parts and (2) electronic copies of each, Maintenance filters –(1) extra high pressure and (1) return filter.
Additional Options:
• 40” x 60” Platform (standard)
• 110 Volt Line to Platform
• (2) Sign Forks on Platform Extendable
• (4) Single-axis joysticks - hardwired
• Walkway with steps and handrails. Includes boom rest.
• 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook, Cable Packer, 180' of 3/8" Cable, 2-part block & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• Hot Shift PTO for Automatic Transmission
• Aluminum 14’6” includes stake pockets and tie down rails. Black grip deck
• (4) 24”x24”x1” composite plastic outrigger pads with (2) steel holders
• Straight down (2 steps with grab handles)
• 98" x 36" x 24" Aluminum Crossbody Box (Requires 2' Shorter Bed) (Treadplate-No paint)
• One button operation – “Platform Stow” – Automatically stow the platform, “Platform Unstow” Unstow the platform to either side of the chassis at lower controls, “Chassis Auto-Level” – Automatically level the chassis with outriggers, “Outrigger Stow” – stow outriggers automatically
• Chassis Rating - 25,999 lbs. GVWR Non CDL
• Mounting Bracket Above 8' Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225)
• Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator
• Welder Leads to Platform - (2) 1 Gauge Cables
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)
MOUNTED ON 2023 FREIGHTLINER M2 106
Mounted on a 2023 Freightliner M2 106 with a 280 HP Cummins B6.7 diesel engine, 198” WB, 132” C.A. 90” AF, Allison 2500 RDS automatic transmission, 29,000 GVWR, 10,000 lb. front axle, 19,000 lb. rear axle, 11R22.5 front and rear tires, hydraulic brakes, 50 gallon alum fuel tank (LH), AM/FM radio, cruise control, power windows, power locks, tilt steering, air conditioning, air ride driver seat, two-man passenger bench seat, unit is painted white,
Standard features:
One new Elliott HiReach L65R having a 65' working height. Side Reach – 56’6” (Center of rotation to end of platform), Platform Capacity – 600lbs., Rear mount turret with boom stowed over the truck cab, Certified ANSI A92.2 for vehicle-mounted elevating and rotating aerial devices, Boom – 3 section 4-plate design, Lift cylinder – 6” double acting, Boom extension – Hydraulic (no cables), Continuous rotation, Oil reservoir – steel 30-gallon capacity includes sight and temperature gauge. Located back of turret box, Subframe-High strength full length, Lower controls – Electric over hydraulic on turret, Rear Outriggers – 17’0” out and down outriggers, Secondary outriggers – 12’0” out and down outriggers, Outrigger controls – rear of bed each corner. Electric over hydraulic, Cable Carrier – full length with tube for hoses and cables. Includes cover, Platform - hydraulic self-leveling with 160° of rotation. Aluminum floor, Hydraulic pump – fixed gear, USB outlet at upper controls, PTO hour meter, Chassis control – Start/Stop, Throttle and horn located at rear bumper, lower turret controls and upper platform, Automatic rotation lockout – Prevents boom from rotating to side where outriggers are not fully extended horizontally, Emergency pump – 12 volt with switch at lower turret and upper platform, Backup alarm, LED lights – bed marker, stop/tail/turn and reverse, Safety kit – Fire extinguisher, safety triangle kit, and two body harnesses with lanyards, Manuals – (1) operation, maintenance and safety, (1) Parts and (2) electronic copies of each, Maintenance filters –(1) extra high pressure and (1) return filter.
Additional Options:
• 40” x 60” Platform (standard)
• 110 Volt Line to Platform
• (2) Sign Forks on Platform Extendable
• (4) Single-axis joysticks - hardwired
• Walkway with steps and handrails. Includes boom rest.
• 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook, Cable Packer, 180' of 3/8" Cable, 2-part block & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• Hot Shift PTO for Automatic Transmission
• Aluminum 14’6” includes stake pockets and tie down rails. Black grip deck
• (4) 24”x24”x1” composite plastic outrigger pads with (2) steel holders
• Straight down (2 steps with grab handles)
• 98" x 36" x 24" Aluminum Crossbody Box (Requires 2' Shorter Bed) (Treadplate-No paint)
• One button operation – “Platform Stow” – Automatically stow the platform, “Platform Unstow” Unstow the platform to either side of the chassis at lower controls, “Chassis Auto-Level” – Automatically level the chassis with outriggers, “Outrigger Stow” – stow outriggers automatically
• Chassis Rating - 25,999 lbs. GVWR Non CDL
• Mounting Bracket Above 8' Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225)
• Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator
• Welder Leads to Platform - (2) 1 Gauge Cables
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)
MOUNTED ON 2023 FREIGHTLINER M2 106
Mounted on a 2023 Freightliner M2 106 with a 280 HP Cummins B6.7 diesel engine, 198” WB, 132” C.A. 90” AF, Allison 2500 RDS automatic transmission, 29,000 GVWR, 10,000 lb. front axle, 19,000 lb. rear axle, 11R22.5 front and rear tires, hydraulic brakes, 50 gallon alum fuel tank (LH), AM/FM radio, cruise control, power windows, power locks, tilt steering, air conditioning, air ride driver seat, two-man passenger bench seat, unit is painted white,
This crane was posted by:
Coastline Equipment Crane Division
www.coastlinecd.comContact: Neil Goodale, Division Manager
Phone: 916-440-8090
Alt Phone: 562-673-4049
Condition
New
0 views this week
0 people have saved
Condition
New
ELLIOTT L65R
Standard features:
One new Elliott HiReach L65R having a 65' working height. Side Reach – 56’6” (Center of rotation to end of platform), Platform Capacity – 600lbs., Rear mount turret with boom stowed over the truck cab, Certified ANSI A92.2 for vehicle-mounted elevating and rotating aerial devices, Boom – 3 section 4-plate design, Lift cylinder – 6” double acting, Boom extension – Hydraulic (no cables), Continuous rotation, Oil reservoir – steel 30-gallon capacity includes sight and temperature gauge. Located back of turret box, Subframe-High strength full length, Lower controls – Electric over hydraulic on turret, Rear Outriggers – 17’0” out and down outriggers, Secondary outriggers – 12’0” out and down outriggers, Outrigger controls – rear of bed each corner. Electric over hydraulic, Cable Carrier – full length with tube for hoses and cables. Includes cover, Platform - hydraulic self-leveling with 160° of rotation. Aluminum floor, Hydraulic pump – fixed gear, USB outlet at upper controls, PTO hour meter, Chassis control – Start/Stop, Throttle and horn located at rear bumper, lower turret controls and upper platform, Automatic rotation lockout – Prevents boom from rotating to side where outriggers are not fully extended horizontally, Emergency pump – 12 volt with switch at lower turret and upper platform, Backup alarm, LED lights – bed marker, stop/tail/turn and reverse, Safety kit – Fire extinguisher, safety triangle kit, and two body harnesses with lanyards, Manuals – (1) operation, maintenance and safety, (1) Parts and (2) electronic copies of each, Maintenance filters –(1) extra high pressure and (1) return filter.
Additional Options:
• 40” x 60” Platform (standard)
• 110 Volt Line to Platform
• (2) Sign Forks on Platform Extendable
• (4) Single-axis joysticks - hardwired
• Walkway with steps and handrails. Includes boom rest.
• 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook, Cable Packer, 180' of 3/8" Cable, 2-part block & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• Hot Shift PTO for Automatic Transmission
• Aluminum 14’6” includes stake pockets and tie down rails. Black grip deck
• (4) 24”x24”x1” composite plastic outrigger pads with (2) steel holders
• Straight down (2 steps with grab handles)
• 98" x 36" x 24" Aluminum Crossbody Box (Requires 2' Shorter Bed) (Treadplate-No paint)
• One button operation – “Platform Stow” – Automatically stow the platform, “Platform Unstow” Unstow the platform to either side of the chassis at lower controls, “Chassis Auto-Level” – Automatically level the chassis with outriggers, “Outrigger Stow” – stow outriggers automatically
• Chassis Rating - 25,999 lbs. GVWR Non CDL
• Mounting Bracket Above 8' Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225)
• Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator
• Welder Leads to Platform - (2) 1 Gauge Cables
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)
MOUNTED ON 2023 FREIGHTLINER M2 106
Mounted on a 2023 Freightliner M2 106 with a 280 HP Cummins B6.7 diesel engine, 198” WB, 132” C.A. 90” AF, Allison 2500 RDS automatic transmission, 29,000 GVWR, 10,000 lb. front axle, 19,000 lb. rear axle, 11R22.5 front and rear tires, hydraulic brakes, 50 gallon alum fuel tank (LH), AM/FM radio, cruise control, power windows, power locks, tilt steering, air conditioning, air ride driver seat, two-man passenger bench seat, unit is painted white,
Standard features:
One new Elliott HiReach L65R having a 65' working height. Side Reach – 56’6” (Center of rotation to end of platform), Platform Capacity – 600lbs., Rear mount turret with boom stowed over the truck cab, Certified ANSI A92.2 for vehicle-mounted elevating and rotating aerial devices, Boom – 3 section 4-plate design, Lift cylinder – 6” double acting, Boom extension – Hydraulic (no cables), Continuous rotation, Oil reservoir – steel 30-gallon capacity includes sight and temperature gauge. Located back of turret box, Subframe-High strength full length, Lower controls – Electric over hydraulic on turret, Rear Outriggers – 17’0” out and down outriggers, Secondary outriggers – 12’0” out and down outriggers, Outrigger controls – rear of bed each corner. Electric over hydraulic, Cable Carrier – full length with tube for hoses and cables. Includes cover, Platform - hydraulic self-leveling with 160° of rotation. Aluminum floor, Hydraulic pump – fixed gear, USB outlet at upper controls, PTO hour meter, Chassis control – Start/Stop, Throttle and horn located at rear bumper, lower turret controls and upper platform, Automatic rotation lockout – Prevents boom from rotating to side where outriggers are not fully extended horizontally, Emergency pump – 12 volt with switch at lower turret and upper platform, Backup alarm, LED lights – bed marker, stop/tail/turn and reverse, Safety kit – Fire extinguisher, safety triangle kit, and two body harnesses with lanyards, Manuals – (1) operation, maintenance and safety, (1) Parts and (2) electronic copies of each, Maintenance filters –(1) extra high pressure and (1) return filter.
Additional Options:
• 40” x 60” Platform (standard)
• 110 Volt Line to Platform
• (2) Sign Forks on Platform Extendable
• (4) Single-axis joysticks - hardwired
• Walkway with steps and handrails. Includes boom rest.
• 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook, Cable Packer, 180' of 3/8" Cable, 2-part block & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform.
• Hot Shift PTO for Automatic Transmission
• Aluminum 14’6” includes stake pockets and tie down rails. Black grip deck
• (4) 24”x24”x1” composite plastic outrigger pads with (2) steel holders
• Straight down (2 steps with grab handles)
• 98" x 36" x 24" Aluminum Crossbody Box (Requires 2' Shorter Bed) (Treadplate-No paint)
• One button operation – “Platform Stow” – Automatically stow the platform, “Platform Unstow” Unstow the platform to either side of the chassis at lower controls, “Chassis Auto-Level” – Automatically level the chassis with outriggers, “Outrigger Stow” – stow outriggers automatically
• Chassis Rating - 25,999 lbs. GVWR Non CDL
• Mounting Bracket Above 8' Crossbody Box for Customer Installed Welder/Generator (Designed for Miller Bobcat 225)
• Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator
• Welder Leads to Platform - (2) 1 Gauge Cables
• HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red (STD)
MOUNTED ON 2023 FREIGHTLINER M2 106
Mounted on a 2023 Freightliner M2 106 with a 280 HP Cummins B6.7 diesel engine, 198” WB, 132” C.A. 90” AF, Allison 2500 RDS automatic transmission, 29,000 GVWR, 10,000 lb. front axle, 19,000 lb. rear axle, 11R22.5 front and rear tires, hydraulic brakes, 50 gallon alum fuel tank (LH), AM/FM radio, cruise control, power windows, power locks, tilt steering, air conditioning, air ride driver seat, two-man passenger bench seat, unit is painted white,
Email Seller
0/3000
Advertisements
