2023 ELLIOTT M43R
Coastline Equipment Crane Division
Neil Goodale: 916-440-8090
Last Updated: 04 September 2023
Neil Goodale: 916-440-8090
Last Updated: 04 September 2023
Price: Inquire
Location: Sacramento, California, United States
Year: 2023
Condition: New
Unit #: 107728
Condition: New
Unit #: 107728
ELLIOTT M43R
Our new Elliott HiReach M43R having a 48’ working height. Basic Unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to turret box, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. “A” type outrigger at front and rear with fixed outrigger shoes. Steel two section hydraulically telescoping boom with double acting lift cylinder. External cable carrier to boom tip with cover. Hydraulically self-leveling and rotating 40” x 60” EZR work platform with remote leveling from platform, and aluminum floor. Power take off, pressure gauge, pump and holding valves on all cylinders. Remote Start/Stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, and two body harness, triangle kit and lanyard. LED Lights to include All Bed Marker Lights, Stop, Tail and Turn. Installed on chassis, tested, checked and ready to operate. One paper and two electronic copies of the operator manual and parts book. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options Included:
• 12’6” Aluminum Bed with LED Lights and Grip Deck Coating (Sides Unpainted)
• Standard Rear Bumper with Steps and Grab Handles
• Automatic rotation lockout – Prevents boom from rotating to side where “MH” outriggers are not fully exftended horizontally. (“A” outriggers remain fully extended)
• 2,000 lb. Planetary Winch with Anti-Two-Block Switch, Horn, 110’ of 5/16” Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Walkway Access to Platform when Boom Stowed (19,500 GVWR Chassis)
• Hot Shift PTO for Automatic Transmission
• 98” x 24” x 30” Aluminum Crossbody Box (Requires 24” Shorter Bed) (Treadplate-No paint)
• (4) 24” x24” x 1” Composite plastic outrigger pads with (2) steel holders
• Chassis Rating – 19,500 lb. GVWR Non CDL
• HiReach Unit Painted White, Subframe Painted Black, Outriggers Painted Red (STD)
• Adjustable mounting bracket above 8’ Crossbody Box for Welder/Generator (For Miller Bobcat 225) – Mounted on curb side of unit
• Remote start/kill switch in platform for customer installed Welder/Generator
• Welder leads to platform – (2) 1 Gauge cables
• HiReach Unit painted white, Subframe painted black, Outriggers painted red (STD)
• Mount and install backup camera supplied with chassis.
MOUNTED ON 2022 DODGE RAM 5500 4X2
Mounted on a 2023 Dodge Ram 5500 4x2 truck chassis with a 360 HP Cummins 6.7L I6 Turbo diesel engine, 50 state emissions, 192” WB, 108” CA., 6-speed automatic transmission Aisin AS69RC HD, 19,500 GVWR, 7,250 lb. front axle, 13,500 lb. rear axle P225/70R19.5F front and rear tires, 4.44 axle ratio, anti-spin rear axle, PTO prep, 52 gallon rear fuel tank, Platform running boards, Bright bumper/grille, engine block heater, cruise control, air conditioning, AM/FM with Bluetooth, 40/20/40 vinyl split bench seat, power windows and locks, heated
Our new Elliott HiReach M43R having a 48’ working height. Basic Unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to turret box, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. “A” type outrigger at front and rear with fixed outrigger shoes. Steel two section hydraulically telescoping boom with double acting lift cylinder. External cable carrier to boom tip with cover. Hydraulically self-leveling and rotating 40” x 60” EZR work platform with remote leveling from platform, and aluminum floor. Power take off, pressure gauge, pump and holding valves on all cylinders. Remote Start/Stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, and two body harness, triangle kit and lanyard. LED Lights to include All Bed Marker Lights, Stop, Tail and Turn. Installed on chassis, tested, checked and ready to operate. One paper and two electronic copies of the operator manual and parts book. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options Included:
• 12’6” Aluminum Bed with LED Lights and Grip Deck Coating (Sides Unpainted)
• Standard Rear Bumper with Steps and Grab Handles
• Automatic rotation lockout – Prevents boom from rotating to side where “MH” outriggers are not fully exftended horizontally. (“A” outriggers remain fully extended)
• 2,000 lb. Planetary Winch with Anti-Two-Block Switch, Horn, 110’ of 5/16” Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Walkway Access to Platform when Boom Stowed (19,500 GVWR Chassis)
• Hot Shift PTO for Automatic Transmission
• 98” x 24” x 30” Aluminum Crossbody Box (Requires 24” Shorter Bed) (Treadplate-No paint)
• (4) 24” x24” x 1” Composite plastic outrigger pads with (2) steel holders
• Chassis Rating – 19,500 lb. GVWR Non CDL
• HiReach Unit Painted White, Subframe Painted Black, Outriggers Painted Red (STD)
• Adjustable mounting bracket above 8’ Crossbody Box for Welder/Generator (For Miller Bobcat 225) – Mounted on curb side of unit
• Remote start/kill switch in platform for customer installed Welder/Generator
• Welder leads to platform – (2) 1 Gauge cables
• HiReach Unit painted white, Subframe painted black, Outriggers painted red (STD)
• Mount and install backup camera supplied with chassis.
MOUNTED ON 2022 DODGE RAM 5500 4X2
Mounted on a 2023 Dodge Ram 5500 4x2 truck chassis with a 360 HP Cummins 6.7L I6 Turbo diesel engine, 50 state emissions, 192” WB, 108” CA., 6-speed automatic transmission Aisin AS69RC HD, 19,500 GVWR, 7,250 lb. front axle, 13,500 lb. rear axle P225/70R19.5F front and rear tires, 4.44 axle ratio, anti-spin rear axle, PTO prep, 52 gallon rear fuel tank, Platform running boards, Bright bumper/grille, engine block heater, cruise control, air conditioning, AM/FM with Bluetooth, 40/20/40 vinyl split bench seat, power windows and locks, heated
This crane was posted by:
Coastline Equipment Crane Division
www.coastlinecd.comContact: Neil Goodale, Division Manager
Phone: 916-440-8090
Alt Phone: 562-673-4049
Condition
New
0 views this week
0 people have saved
Condition
New
ELLIOTT M43R
Our new Elliott HiReach M43R having a 48’ working height. Basic Unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to turret box, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. “A” type outrigger at front and rear with fixed outrigger shoes. Steel two section hydraulically telescoping boom with double acting lift cylinder. External cable carrier to boom tip with cover. Hydraulically self-leveling and rotating 40” x 60” EZR work platform with remote leveling from platform, and aluminum floor. Power take off, pressure gauge, pump and holding valves on all cylinders. Remote Start/Stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, and two body harness, triangle kit and lanyard. LED Lights to include All Bed Marker Lights, Stop, Tail and Turn. Installed on chassis, tested, checked and ready to operate. One paper and two electronic copies of the operator manual and parts book. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options Included:
• 12’6” Aluminum Bed with LED Lights and Grip Deck Coating (Sides Unpainted)
• Standard Rear Bumper with Steps and Grab Handles
• Automatic rotation lockout – Prevents boom from rotating to side where “MH” outriggers are not fully exftended horizontally. (“A” outriggers remain fully extended)
• 2,000 lb. Planetary Winch with Anti-Two-Block Switch, Horn, 110’ of 5/16” Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Walkway Access to Platform when Boom Stowed (19,500 GVWR Chassis)
• Hot Shift PTO for Automatic Transmission
• 98” x 24” x 30” Aluminum Crossbody Box (Requires 24” Shorter Bed) (Treadplate-No paint)
• (4) 24” x24” x 1” Composite plastic outrigger pads with (2) steel holders
• Chassis Rating – 19,500 lb. GVWR Non CDL
• HiReach Unit Painted White, Subframe Painted Black, Outriggers Painted Red (STD)
• Adjustable mounting bracket above 8’ Crossbody Box for Welder/Generator (For Miller Bobcat 225) – Mounted on curb side of unit
• Remote start/kill switch in platform for customer installed Welder/Generator
• Welder leads to platform – (2) 1 Gauge cables
• HiReach Unit painted white, Subframe painted black, Outriggers painted red (STD)
• Mount and install backup camera supplied with chassis.
MOUNTED ON 2022 DODGE RAM 5500 4X2
Mounted on a 2023 Dodge Ram 5500 4x2 truck chassis with a 360 HP Cummins 6.7L I6 Turbo diesel engine, 50 state emissions, 192” WB, 108” CA., 6-speed automatic transmission Aisin AS69RC HD, 19,500 GVWR, 7,250 lb. front axle, 13,500 lb. rear axle P225/70R19.5F front and rear tires, 4.44 axle ratio, anti-spin rear axle, PTO prep, 52 gallon rear fuel tank, Platform running boards, Bright bumper/grille, engine block heater, cruise control, air conditioning, AM/FM with Bluetooth, 40/20/40 vinyl split bench seat, power windows and locks, heated
Our new Elliott HiReach M43R having a 48’ working height. Basic Unit includes base assembly supporting rear mounted rotating turret, hydraulically powered continuous rotation mechanism, oil reservoir mounted to turret box, oil, and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. “A” type outrigger at front and rear with fixed outrigger shoes. Steel two section hydraulically telescoping boom with double acting lift cylinder. External cable carrier to boom tip with cover. Hydraulically self-leveling and rotating 40” x 60” EZR work platform with remote leveling from platform, and aluminum floor. Power take off, pressure gauge, pump and holding valves on all cylinders. Remote Start/Stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls, PTO hour meter, backup alarm, fire extinguisher, and two body harness, triangle kit and lanyard. LED Lights to include All Bed Marker Lights, Stop, Tail and Turn. Installed on chassis, tested, checked and ready to operate. One paper and two electronic copies of the operator manual and parts book. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs.
Additional Options Included:
• 12’6” Aluminum Bed with LED Lights and Grip Deck Coating (Sides Unpainted)
• Standard Rear Bumper with Steps and Grab Handles
• Automatic rotation lockout – Prevents boom from rotating to side where “MH” outriggers are not fully exftended horizontally. (“A” outriggers remain fully extended)
• 2,000 lb. Planetary Winch with Anti-Two-Block Switch, Horn, 110’ of 5/16” Cable & Retainer Lug
• 500 lb. Platform Mounted Jib with Hydraulic Winch. Jib Stows in Platform
• 110 Volt Line to Platform
• (2) Sign Forks on Platform
• Walkway Access to Platform when Boom Stowed (19,500 GVWR Chassis)
• Hot Shift PTO for Automatic Transmission
• 98” x 24” x 30” Aluminum Crossbody Box (Requires 24” Shorter Bed) (Treadplate-No paint)
• (4) 24” x24” x 1” Composite plastic outrigger pads with (2) steel holders
• Chassis Rating – 19,500 lb. GVWR Non CDL
• HiReach Unit Painted White, Subframe Painted Black, Outriggers Painted Red (STD)
• Adjustable mounting bracket above 8’ Crossbody Box for Welder/Generator (For Miller Bobcat 225) – Mounted on curb side of unit
• Remote start/kill switch in platform for customer installed Welder/Generator
• Welder leads to platform – (2) 1 Gauge cables
• HiReach Unit painted white, Subframe painted black, Outriggers painted red (STD)
• Mount and install backup camera supplied with chassis.
MOUNTED ON 2022 DODGE RAM 5500 4X2
Mounted on a 2023 Dodge Ram 5500 4x2 truck chassis with a 360 HP Cummins 6.7L I6 Turbo diesel engine, 50 state emissions, 192” WB, 108” CA., 6-speed automatic transmission Aisin AS69RC HD, 19,500 GVWR, 7,250 lb. front axle, 13,500 lb. rear axle P225/70R19.5F front and rear tires, 4.44 axle ratio, anti-spin rear axle, PTO prep, 52 gallon rear fuel tank, Platform running boards, Bright bumper/grille, engine block heater, cruise control, air conditioning, AM/FM with Bluetooth, 40/20/40 vinyl split bench seat, power windows and locks, heated
Email Seller
0/3000
Advertisements
