2023 MANITEX A62
Empire Crane Co., LLC
Luke Lonergan: 800-342-7575
Last Updated: 04 September 2023
Luke Lonergan: 800-342-7575
Last Updated: 04 September 2023
Price: Inquire
Location: Syracuse, New York, United States
Year: 2023
Condition: New
Serial #: 490014
Condition: New
Serial #: 490014
2023 Manitex A62 - Telescopic Boom Aerial Work Platform
BASE FRAME
Steel tubes bolted to truck's chassis. Equipped with 4 vertical stabilizers feet mounted on body with direct deployment.
The front part of the frame is fitted with the attachment plate for housing the rotation fifth wheel.
Chassis also features an anti-slip aluminum charging floor.
ARM-BEARING TURRET
The turret is made of high yield steel and rotates on a ball bearing (rotation fifth wheel) activated by means of an electric orbital motor.
BOOM
The boom is telescopic with hydraulic extension. It is made of die-formed and welded steel sheet with a high yield point. The boom has an operating range of -15° a + 75 ° to the horizontal and is fitted with an extendable part which slides on blocks made of self-lubricating, low-friction material.
The new boom design makes the machine extremely rigid.
The work boom houses a channel inside for the hoses and cables connected to the basket.
OPERATOR BASKET
1700x700x1100 mm operator basket made of aluminum. The safety belt fasteners inside the basket are secured to the aluminum reinforcement. Available a safety device to detect if the operator is in the correct position: a man pedal allows aerial working only if the operator is in control position, to avoid dangerous movements.
BASKET LEVELLING
It is ensured by a closed-loop hydraulic master / salve system with manual resynch system. It fits a lock that can be activated from the basket.
CONTROLS
Equipment features a compensated proportional hydraulic control system that can control several maneuvers at the same time.
Stabilization: with distributor featuring 4 independent levers to separately control the 4 stabilizers.
Upper structure: controls available from two panels:
- on column, protected by metal guards and reachable through locked doors. These controls are output through the manually-activated parallel one-piece distributor. There is a mushroom-head emergencypush-button self-retained in active position which can be turned to release and reset.
- in basket, protected by fixed thermoformed guards, there are the manually-activated hydraulic controls, truck starting and stop pushbutton board and the mushroom-head emergency push-button self-retained in active position and which can be turned to release and reset.
Truck TBD. Stock photos used in Listing.
Call Empire Crane for a quote and more details
BASE FRAME
Steel tubes bolted to truck's chassis. Equipped with 4 vertical stabilizers feet mounted on body with direct deployment.
The front part of the frame is fitted with the attachment plate for housing the rotation fifth wheel.
Chassis also features an anti-slip aluminum charging floor.
ARM-BEARING TURRET
The turret is made of high yield steel and rotates on a ball bearing (rotation fifth wheel) activated by means of an electric orbital motor.
BOOM
The boom is telescopic with hydraulic extension. It is made of die-formed and welded steel sheet with a high yield point. The boom has an operating range of -15° a + 75 ° to the horizontal and is fitted with an extendable part which slides on blocks made of self-lubricating, low-friction material.
The new boom design makes the machine extremely rigid.
The work boom houses a channel inside for the hoses and cables connected to the basket.
OPERATOR BASKET
1700x700x1100 mm operator basket made of aluminum. The safety belt fasteners inside the basket are secured to the aluminum reinforcement. Available a safety device to detect if the operator is in the correct position: a man pedal allows aerial working only if the operator is in control position, to avoid dangerous movements.
BASKET LEVELLING
It is ensured by a closed-loop hydraulic master / salve system with manual resynch system. It fits a lock that can be activated from the basket.
CONTROLS
Equipment features a compensated proportional hydraulic control system that can control several maneuvers at the same time.
Stabilization: with distributor featuring 4 independent levers to separately control the 4 stabilizers.
Upper structure: controls available from two panels:
- on column, protected by metal guards and reachable through locked doors. These controls are output through the manually-activated parallel one-piece distributor. There is a mushroom-head emergencypush-button self-retained in active position which can be turned to release and reset.
- in basket, protected by fixed thermoformed guards, there are the manually-activated hydraulic controls, truck starting and stop pushbutton board and the mushroom-head emergency push-button self-retained in active position and which can be turned to release and reset.
Truck TBD. Stock photos used in Listing.
Call Empire Crane for a quote and more details
This crane was posted by:
Empire Crane Co., LLC
www.empirecrane.comContact: Luke Lonergan, Vice President
Phone: 800-342-7575
Alt Phone: 315-458-4101
Fax: 315-458-3169
Condition
New
0 views this week
0 people have saved
Condition
New
2023 Manitex A62 - Telescopic Boom Aerial Work Platform
BASE FRAME
Steel tubes bolted to truck's chassis. Equipped with 4 vertical stabilizers feet mounted on body with direct deployment.
The front part of the frame is fitted with the attachment plate for housing the rotation fifth wheel.
Chassis also features an anti-slip aluminum charging floor.
ARM-BEARING TURRET
The turret is made of high yield steel and rotates on a ball bearing (rotation fifth wheel) activated by means of an electric orbital motor.
BOOM
The boom is telescopic with hydraulic extension. It is made of die-formed and welded steel sheet with a high yield point. The boom has an operating range of -15° a 75 ° to the horizontal and is fitted with an extendable part which slides on blocks made of self-lubricating, low-friction material.
The new boom design makes the machine extremely rigid.
The work boom houses a channel inside for the hoses and cables connected to the basket.
OPERATOR BASKET
1700x700x1100 mm operator basket made of aluminum. The safety belt fasteners inside the basket are secured to the aluminum reinforcement. Available a safety device to detect if the operator is in the correct position: a man pedal allows aerial working only if the operator is in control position, to avoid dangerous movements.
BASKET LEVELLING
It is ensured by a closed-loop hydraulic master / salve system with manual resynch system. It fits a lock that can be activated from the basket.
CONTROLS
Equipment features a compensated proportional hydraulic control system that can control several maneuvers at the same time.
Stabilization: with distributor featuring 4 independent levers to separately control the 4 stabilizers.
Upper structure: controls available from two panels:
- on column, protected by metal guards and reachable through locked doors. These controls are output through the manually-activated parallel one-piece distributor. There is a mushroom-head emergencypush-button self-retained in active position which can be turned to release and reset.
- in basket, protected by fixed thermoformed guards, there are the manually-activated hydraulic controls, truck starting and stop pushbutton board and the mushroom-head emergency push-button self-retained in active position and which can be turned to release and reset.
Truck TBD. Stock photos used in Listing.
Call Empire Crane for a quote and more details
BASE FRAME
Steel tubes bolted to truck's chassis. Equipped with 4 vertical stabilizers feet mounted on body with direct deployment.
The front part of the frame is fitted with the attachment plate for housing the rotation fifth wheel.
Chassis also features an anti-slip aluminum charging floor.
ARM-BEARING TURRET
The turret is made of high yield steel and rotates on a ball bearing (rotation fifth wheel) activated by means of an electric orbital motor.
BOOM
The boom is telescopic with hydraulic extension. It is made of die-formed and welded steel sheet with a high yield point. The boom has an operating range of -15° a 75 ° to the horizontal and is fitted with an extendable part which slides on blocks made of self-lubricating, low-friction material.
The new boom design makes the machine extremely rigid.
The work boom houses a channel inside for the hoses and cables connected to the basket.
OPERATOR BASKET
1700x700x1100 mm operator basket made of aluminum. The safety belt fasteners inside the basket are secured to the aluminum reinforcement. Available a safety device to detect if the operator is in the correct position: a man pedal allows aerial working only if the operator is in control position, to avoid dangerous movements.
BASKET LEVELLING
It is ensured by a closed-loop hydraulic master / salve system with manual resynch system. It fits a lock that can be activated from the basket.
CONTROLS
Equipment features a compensated proportional hydraulic control system that can control several maneuvers at the same time.
Stabilization: with distributor featuring 4 independent levers to separately control the 4 stabilizers.
Upper structure: controls available from two panels:
- on column, protected by metal guards and reachable through locked doors. These controls are output through the manually-activated parallel one-piece distributor. There is a mushroom-head emergencypush-button self-retained in active position which can be turned to release and reset.
- in basket, protected by fixed thermoformed guards, there are the manually-activated hydraulic controls, truck starting and stop pushbutton board and the mushroom-head emergency push-button self-retained in active position and which can be turned to release and reset.
Truck TBD. Stock photos used in Listing.
Call Empire Crane for a quote and more details
Email Seller
0/3000
Advertisements
