Email Blast: More Inventory on TexasUsedCraneSales.com | Crane Network

2022-08-16 19:36

More Inventory on TexasUsedCraneSales.com

Share

Tweet

Forward

Share

View More Available Units on TexasUsedCraneSales.com

2020 T adano GR-1600XL-3

$1,350,000 USD

200' main boom, 59' jib, self removable counter weights, barely used and fully loaded. For sale or rent.

View Fulls Details

2014 Tadano GR-750XL

$400,000 USD

75 US ton capacity, 36.1’ - 141.1’ five-section boom, recently repainted, 33.1’ - 58.1’ bi-fold lattice jib, Auxiliary lifting sheave, Main & Auxiliary Hoists, Drum rotator indicator, Boom angle indicator, Hot water cab heater & A/C, 4 x 4 x 4 drive/steer, 6.2 ton headache ball, 75 ton 7-sheave hook block

View Fulls Details

2012 Terex CD 225

$125,000 USD

25 ton rough terrain, 72' main, 43' jib, block and ball, new decals, super clean, Lift cylinder rod replaced and resealed, all boom was removed and everything inside inspected including wear pads replaced that are hard to get to, chains greased, cylinders checked and boom replaced, new wire rope, new computer, completly serviced and ready to work!! A new OSHA inspection in your company name included in the price.

View Fulls Details

2016 Tadano GR-1000XL-3

$525,000 | NOW $510,000 USD

Boom: 39.4-154.2 feet, 5 section boom and 33.2 / 58.1 feet bi-fold swingaway jib. Hoist: 2.. Drive: 4x4x4. Tires: 29.5x25. Engine: Cummins. 8 sheave, 100 ton (90.7 metric ton) with swivel hook and safety latch for ¾” (19mm) wire rope, 7.3 ton (6.6 metric ton) hook ball with swivel; Self-removable counterweight, Telematics (machine data logging and monitoring system) with HELLO-NET via internet

View Fulls Details

1994 Grove RT58D

Inquire for Price

Financing available!! Manitowoc Encore - Crane Care RT 58D Model Re-Manufacture Manitowoc Crane Care scope of work for the remanufacturing of RT 58D serial number 79112. Our Encore Certified Crane Check program was created to assist in laying down the parameters for a complete machine remanufacture and thorough inspection using OEM replacement parts and utilizing a factory owned and operated facility manned by specially qualified technicians. Not all components were fully replaced on this machine, but all were tested, and all will hold an Encore Certified one-year warranty. By major components: 1. Engine was rebuilt by OEM (Cummins 5.9) back to factory specs. a. Holds a one-year warranty through Cummins. 2. All hydraulic fittings, valves, and hoses for the outrigger system were replaced. 3. Hydraulic control valves, electric solenoids valves, flow dividers, holding valves: were tested and replaced/rebuilt as needed. 4. Hydraulic Cylinders: Outrigger, boom lift, boom telescopic, were remanufactured and pressure tested. 5. Hydraulic swivel was pressure tested. 6. Hydraulic and Fuel tanks were drained, removed, and thoroughly cleaned. New filters were provided including fuel, hydraulic, and fuel-water separator. 7. The starter and alternator were remanufactured. 8. Lights and indicators: including headlights, back-ups, turn signals etc. were replaced. 9. Engine radiator was replaced with new. 10. Hydraulic pumps (steer, three stage, charge) were tested. 11. The wire rope was replaced. A load test was performed. 12. Telescopic (60ft) hydraulic boom assembly: The entire boom was removed and disassembled. Each section was inspected using our procedures to check for camber, twist, squareness, convex, concave or any structural defects. Hardware, rope retainer pins, bearings, spacers, wear pads, extension and retraction cables inside the boom was replaced. 13. The four tires were replaced. Wheels were blasted and painted. 14. Remanufacturing of the cab will include the following: • Replacement of all cab weather-stripping, cab acoustic, and floor mat. • Replacement operators’ door latch, locks, and handles. • Replacement of all cab glass and rubber seal. • Replacement of all gauges, indicator lights, panels or control labels and switches. • Replacement of operators’ seat to include retractable seat belt. • Replacement of steering wheel, steering column including horn switch. • Replacement of side mounted mirrors, cab fan, dome light, wiper system, and accelerator pedal. 15. Swing gearbox was tested. 16. The four outrigger beams were removed, blasted, and painted. 17. Hook block structure and sheaves were inspected and replaced as needed. 18. Headache ball was replaced with new. 19. LMI - Wika QScale LMI (Load Moment Indicator) system retrofit with currently available technology will be provided. This system shall provide comparable performance to existing new crane systems. 20. Jib (20ft.) was blast and painted - after inspection. New locking pins, and cable was installed. 21. Clean and paint the entire machine and install new decals in accordance with Manitowoc Crane Group manufacturing and design requirements. 22. We will provide limited warranty for a one (1) year timeframe for all work completed. The start of the warranty shall be the in-service day of the crane

View Fulls Details

For More Information, Contact:

Texas Used Crane Sales

David Green

281-623-3411

www.texasusedcranesales.com

3400 Mesa Dr, Houston, TX 77013, USA

Email Seller

View All Available Units from Texas Used Crane Sales

Stay Connected

Email

Twitter

Facebook

LinkedIn

Instagram

YouTube

Finance Partners

Transport Partners

Copyright © 2022 Crane Network, All rights reserved.

Our mailing address is:
400 Illinois St., Lemont, IL, 60439

Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list