1997 Elliot-Ford ECI-3-70 Aerial Work Platform and Crane; CranesList ID: 712,

NOW $49,900

• 60' maximum Side Reach,
• Main Winch,
• Detachable Work Platform: Steel inverted "A" sub frame with fiberglass open grating bottom and fiberglass tubular railsbonded and bolted with nylon bolts, 2" Diameter platform, 40" x 60" Platform with 600# capacity,
• Lower Control Box: Steel Box with lockable door on curb-side at turret base,
• Platform Controls: Three individual proportional electronic controllers meter pilot-operated, pressure-compensated modulating valves. Remote controls for boom operations from platform operate from a steel remote control box. Hi/Lo range, start/stop and engine speed switches are also located at platform. Electric remote control cable extends through the electrical slip ring to cable carrier on side of boom to extending boom sections.
• Platform Leveling System: Hydraulic "closed" system consisting of twin platform cylinders interacting with a boom-actuated master cylinder mounted in "gooseneck" of boom support turret. System provided with factory-set relief valves to compensate for oil expansion or overload during platform leveling operation. Remote releveling controls provided in platform and at ground controls to give precise re-leveling capability.
• 360° Non Continuous Rotation,
• Mounted behind the cab of a Ford F-800 Two Axle Truck; Vehicle Identification Number: 1FDXF80E4VVA28915,
• 8.3 Cummins Diesel Engine,
• Allison Automatic Transmission,
• Front and Rear Tires: 11R 22.5G,
• Two Amber Dome lights on truck cab,
• Front and Rear Out and Down Outriggers,
• Fifth Front Outrigger,
• Storage Locker,
• 690 Hours as of 8.2022,
• 7,175 thought to be Original Miles as of 8.2022.
• LOCATED IN NEVADA!

1996 Grove TMS700B, 50 Ton, Hydraulic Truck; CranesList ID: 234,

NOW $74,900 USD

• 35'-110' Four Section Full Power Boom with Auxiliary Lifting Sheave,
• 32'- 56' Swing Away Lattice Extension (Jib) off-settable at 0, 15 or 30 degrees,
• Main & Auxiliary Winches with 3/4" wire rope,
• Electric Boom Angle-Length Indicator, Two Speed, Drum Rotation Indicator, Load Moment indicator, Anti-Two Block,
• McKissick 3 Sheave Hook Block, 
• Headache Ball,
• Two 3,900# each hydraulically removable counterweights each pinned to the turntable,
• 360 degree rotation,
• Single Axis Controls,
• Air Conditioning UP,
• 7' 8" Wide 8 X 4 Grove Carrier,
• Cummins 6CTA 8.3L six cylinder turbocharged and after cooled 250HP Diesel Engine,
• Eaton Fuller Roadranger RTO6613 13 speeds forward and 3 reverse Transmission, 
• Front Tires:  425 / 65 R 22.5-20PR,
• Rear Tires:  11.00 X R20-14PR, 
• Three Position Outriggers,
• Outrigger Controls and level indicator in the operator's cab,
• Recent Repairs: Cummins Engine rebuilt 20,000 miles ago, Rebuilt swing motor,
• Crane is certified,
• LOCATED IN OREGON

1978 Link-Belt HC218, 82 Ton, Lattice Boom Truck Crane; CranesList ID: 689,

NOW $39,500 USD

• 200' Main Tubular Boom,
• Mid point Pendant Lines,
• 45' Jib,
• Cummins Diesel Engine Up,
• Twin Disc Torque Convertor,
• Main and Auxiliary Winches with 3/4" wire rope,
• Boom Angle Indicator, Drum Rotation Indicator, Cranesmart Load indicator,
• Hook Ball,
• Five Sheave Hook Block,
• 21,000# A Upper Counterweights,
• 11' Wide Link-Belt 8 x 4 Carrier,
• Cummins Diesel Engine,
• Eaton Fuller Roadranger RTO-915 15 Speed Forward and 3 Reverse Transmission - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Front and Rear Tires: 14:00 X 24J 18 Ply - SUBJECT TO FINAL CONFIRMATION DURING TIME OF INSPECTION,
• 10,800# Bumper Counterweight,
• Full width, double box Front and Rear Hydraulic outriggers,
• Firth Front Outrigger,
• Storage Bins.
• LOCATED IN TEXAS!

1982 Link-Belt HC238B, 140 Ton Lattice Boom Truck Crane; CranesList ID: 688,

NOW $99,900 USD

• 200' Pin Connected Tubular Main Boom,
• Mid-Point Pendant Lines,
• 45' Jib,
• Cummins Diesel Engine Up,
• Three Stage Torque Convertor,
• Main and Auxiliary winches with 1" Wire Rope,
• Drum Rotation Indicator, 
• Overhaul Ball,
• Three Sheave Hook Block,
• Five Sheave Hook Block,
• A&B Counterweights 30,000# each - 60,000# Total - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• 11' 10" Wide Link-Belt 8 x 4 Carrier,
• Cummins Diesel Engine,
• Eaton Fuller 10 speed Forward and 3 Reverse Transmission - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Front and Rear Tires: 14:00 X 24L - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• 11,400# Front Bumper Counterweight,
• Full width double box Hydraulic outriggers,
• 5th Front Hydraulic Outrigger,
• Removable outrigger box,
• Storage Bins,
• LOCATED IN TEXAS!